EN
(26)
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
STOPPING AND PARKING
1. Twist the throttle grip away from you to close the
throttle completely.
2. Apply the front and rear brakes evenly and at the same
time.
3. Downshift
through
the
gears
as
road
speed
decreases.
4. Select neutral with the clutch lever grasped toward the
grip (disengaged position) just before the motorcycle
stops.
The neutral position can be confirmed by
observing the neutral indicator “N”.
5. Park the motorcycle on a firm, flat surface where it will
not fall over.
6. Turn the key to the “
%
” position.
7. Turn the handlebars all the way to the left and lock the
steering for security.
8. Remove the key.
B
WARNING
Hard braking while turning, on wet, loose, rough,
or other slippery surface may cause wheel skid and
loss of control.
B
WARNING
Following another vehicle too closely can lead to a
collision. As motorcycle speeds increase, stopping
distance increases progressively.
Be sure you
have a safe stopping distance between you and the
vehicle in front of you.
B
WARNING
Inexperienced riders tend to underutilize the front
brake. This can cause excessive stopping distance
and lead to a collision.
Using only the front or
rear brake can cause skidding and loss of control.
Thus, the two brakes should be used in a balanced
way at the same time.
B
WARNING
If the rider brakes suddenly in turns, the motorcycle
will lose control. The correct method is to brake
before turns to slow down.
B
WARNING
Use the braking system carefully and gently on wet
and slippery roads or in turns. Urgent braking on
uneven or slippery roads will cause the motorcycle
to be out of control.
(26)
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
24
