EN
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
(17)
B
WARNING
After the engine is started, inspect whether the kick
lever has been returned to its normal position.
B
WARNING
Do not start with the kick lever when the motorcycle
is supported on the side stand.
B
WARNING
Do not start with the kick starter until you have
grasped the clutch lever.
TOOL KIT
The tool kit is fixed on the rear mudguard. To take out a
tool from it, open the left cover with the relevant key, take
out the L-shaped tool
1
and use the L-shaped tool
1
to
remove the fixing bolts
2
on the left and right sides of the
saddle. After the saddle is removed, the tool box
3
can
be seen. It can be taken out after the cover of the tool box
is opened.
PARKING STAND
The motorcycle is equipped with both a main stand and a
side stand.
Main stand
1
To support the motorcycle with the main stand, tread on
the main stand
1
rod, hold the steering handlebar with
your left hand, grasp the rear carriage
3
with your right
hand and pull the motorcycle upward to a standstill.
Side stand
2
The side stand is for temporary parking. When use the
side stand, stop the engine, then rotate the side stand to
lower limit, leave your motorcycle on the side stand only
after confirming it is stable.
3
15
Haojue EG125 99011H11A60H000 V01 EN+FR (EN) 2015-1-27
(17)
