HANYOUNG NUX MP3-4 H Series, Instruction Manual

Page: 3 / 4

3 4
MF0104KE130121
Digital frequency meter
MP3-4H, MP6-4H
Thank you for purchasing HANYOUNG product.
Please check whether the product is the exactly same as you ordered.
Before using the product, please read this instruction manual carefully.
Please keep this manual where you can view at any time
1381-3, Juan-Dong, Nam-Gu Incheon, Korea.
TEL:(82-32)876-4697 FAX:(82-32)876-4696
http://www.hynux.net
HANYOUNGNUX CO.,LTD
HEAD OFFICE
JL.CEMPAKA BLOK F 16 NO.02 DELTA SILICON II INDUSTRIAL PARK
LIPPO CIKARANG CICAU, CIKARANG PUSAT BEKASI 17550 INDONESIA
TEL : 62-21-8911-8120~4 FAX : 62-21-8911-8126
PT. HANYOUNG ELECTRONIC INDONESIA
INDONESIA
FACTORY
Connection diagram
● MP3-4-NH ● MP6-4-NH
▒ MP3-4-OH
(Relay output, 4 - 20 mA Current output)
▒ MP3-4-1H
(Relay output)
▒ MP6-4-OH
(Relay output, 4 - 20 mA Current output)
▒ MP6-4-1H
(Relay output)
▒ MP6-4-2H
(NPN TR, 4 - 20 mA Current output)
▒ MP6-4-3H
(PNP TR, 4 - 20 mA Current output)
Suffix code
Model Code Information
MP     Digital frequency meter
Dimension
3 Dimension 96 × 48 ㎜
6 Dimension 72 × 36 ㎜
Displayable digit 4 4 digits (9999)
Output (Optional)
N Only for display
0 Relay output (HI, GO, LO) + Current output (4 - 20 ㎃)
1 Relay output (HI, GO, LO)
2 NPN TR output (HI, GO, LO) + Current output (4 - 20 ㎃)
3 PNP TR output (HI, GO, LO) + Current output (4 - 20 ㎃)
Measurement input signal H AC input frequency measurement
※ Measurement input signal is confined to MP6-4H and MP3-4H is under developed
Power supply voltage 100 - 240 V a.c 50 - 60 ㎐ allowable voltage fluctuation : 85 ~ 110 %
Power consumption 5 VA
Display method 7 Segment LED Display
Insulation resistance 100 min ㏁ (500 V d.c mega standard) between the external terminal and case
Dielectric strength
2000 V a.c for 1 min (between the external terminal and case)
Noise immunity
Square wave noise by the noise simulator pulse width 1 ㎲, ±1000 V
Vibration resistance
Malfunction 10 -55 Hz peack amplitude 0.5mm X/Y/Z each direction for 1 hour
Resistance 10 -55 Hz peack amplitude 0.5mm X/Y/Z each direction for 2 hours
Shock resistance
Malfunction 100 ㎨ X·Y·Z each direction for 3 times
Resistance 300 ㎨ X·Y·Z each direction for 3 times
Ambient temperature
-10 ~ 55 ℃ (icing or dew condensation not allowed)
Ambient humidity 35 ~ 85 % RH (without dew condensation)
Storage temperature
-20 ~ 65 ℃ (icing or dew condensation not allowed)
Relay Life span
Phisical : 20,000,000 ㎰ Min , Electrical : 100,000 ㎰ Min
Measurement method
Coefficient Measuring method
Display cycle
When the input period is less than 0.1 second, it displays every 0.1 second.
When the input period exceeds 0.1 second, it displays every 0.1 second.
Displayable digit -1999 ~ 9999 (4 digits)
Measurable range 0.1 Hz - 9999 Hz
Measuring items Frequency (Hz)
Decimal function Selection by internal parameter
Scaling function Displaying function of converting measured maximum value and minimum value into random figure
Hold function External hold automatic hold of peak detection for maximum value and minimum value
Control Hold of Displaying value
Other functions
•Comparative output •Max value / min value indication by the front key
•Protect the set value from changing •Average the value and delay the display cycle
Output (Optional)
·Relay output of contact point (3 output)
·Current output (4 - 20 ㎃) ·Transistor output (NPN, PNP)
Weight Approx. 180 g
Specification
Parameter 1
Display Mode name Default value Set range Remark
Input range
0
Select the measuring range of
input frequency.
1
2
3
Factor
Max :
Use this to get the ×(involution)
of input reading.
Min :
Input
compensation
Max :
Correct the error by ) or
reducing(-) to the input reading.
Min :
Updating
cycle
Max :
Set up the time for measure the
mean value of input.
Min :
High scale
Max :
Set up the maximum value
of display when you need to
convert into random value.
Min :
Low scale
Max :
Set up the minimum value of
display when you need to
convert into random value.
Min :
Position of
decimal point
Set up the location of
a decimal point
Hold function
Set up the autonomic holding
when detecting PEAK value.
Use external hold (E-Ha)
Lock function
Set up the locking on function of
panel meters
Parameter 2
Display Mode name Default value Set range Remark
High Peak
Display
- -
Display the max value
among the measured values.
Low Peak
Display
- -
Display the min value
among the measured values.
Output
High Set
Max : +9999
Set up the high set value.
Min : -1999
Output
Low Set
Max : +9999
Set up the low set value.
Min : -1999
Output Type
Select
LL(LL.ot)
Set the comparative output
mode.
HH(HH.ot)
LH(LH.ot)
HL(HL.ot)
IL(IL.ot)
HYS terisis
Max : 99
Set up the hysteresis.
Min : 00
INSTRUCTION MANUAL
Safety information
Before using the product, please read the safety information thoroughly and use it properly.Alerts declared in the manual
are classified to Danger, Warning and Caution by their criticality
DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
There is a danger of occurring electric shock in the input/output terminals so please never let your body or conductive substance is touched.
Danger
•This product does not contain an electric switch or fuse, so the user needs to install a separate electric switch
or fuse externally. (Fuse rating : 250 V 0.5 A)
•To prevent defection or malfunction of this product, apply a proper power voltage in accordance with the rating.
•To prevent electric shock or malfunction of product, do not supply the power until the wiring is completed.
•Since this product is not designed with explosion-protective structure, do not use it any place with flammable or explosive gas.
•Do not decompose, modify, revise or repair this product. This may be a cause of malfunction, electric shock or fire.
•Reassemble this product while the power is OFF. Otherwise, it may be a cause of malfunction or electric shock.
•If you use the product with methods other than specified by the manufacturer, there may be bodily injuries or property damages.
•There is a possibility of occurring electric shock so please use this product after installing it onto a panel while it is operating.
Warning
•The contents of this manual may be changed without prior notification.
•Do not use this product at any place with occurring corrosive (especially noxious gas or ammonia) or flammable gas.
•Do not use this product at any place with direct vibration or impact.
•Do not use this product at any place with liquid, oil, medical substances, dust, salt or iron contents.(Use at Pollution level 1 or 2)
•Do not polish this product with substances such as alcohol or benzene. (Use neutral detergent.)
•Do not use this product at any place with a large inductive difficulty or occurring static electricity or magnetic noise.
•Do not use this product at any place with possible thermal accumulation due to direct sunlight or heat radiation.
•Install this product at place under 2,000 m in altitude.
•When the product gets wet, the inspection is essential because there is danger of an electric leakage or fire.
•If there is excessive noise from the power supply, using insulating transformer and noise filter is
recommended. The noise filter must be attached to a panel which is already connected to a ground
and the wire between the filter output side and power supply terminal must be short as possible.
•If twisting the power cables closely together then it is effective against noise.
•Do not connect anything to the unused terminals.
•After checking the polarity of terminal, connect wires at the correct position.
•When this product is connected onto a panel, use a circuit breaker or switch approved with IEC60947-1 or IEC60947-3.
•Install a circuit breaker or switch at near place for convenient use.
•For the continuous and safe use of this product, the periodical maintenance is recommended.
•Some parts of this product have limited life span, and others are changed by their usage.
•The warranty period for this product including parts is one year if this product is properly used.
Caution