installation & connection
16_
installation & connection
M
`
For the installation of a ceiling or hallway view, we recommend installing the camera body at the desired orientation and then
rotating only the sunshield towards the ceiling. You can rotate just the sunshield without loosening the direction adjustment
screw on the camera body.
`
If the installation angle of the lens is changed by rotating the camera body as shown below, you need to rotate the screen in
the camera's web viewer to match the changed angle.
Outdoor installation
When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be
purchased in stores) so that water does not leak from the gap of the cable connected to the outside.
1.
Connect the power, I/O, and network cables.
2.
Wrap the black cable jacket (Area A) and the cable connection area with waterproof (butyl rubber) tape so
that more than half of the butyl rubber tape is overlapped.
J
`
If the cable jacket is not waterproofed properly, then it can directly cause leakage. Make sure to protect the cable with a
dense layer of taping.
`
Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length.
Summary of Contents for TNO-C3010TRA
Page 30: ......
