30_
setup screen
setup screen
SETTING ALARM INPUT
Connecting to the I/O port box
Connect the Alarm I/O cable to the corresponding port of the port box.
signal light
EAS
~
ALARM-IN : Used to connect the alarm input sensor.
~
ALARM-OUT : Used to connect the alarm output signal.
~
GND : Common port for alarm in/output signal.
J
`
If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are connected by
using the open collector method, it may cause malfunction.
Refer to the “
Alarm Out Wiring Diagram
” when connecting devices that exceed the voltage and current
specifications.
