20_
network connection and setup & webviewer
network connection and setup & webviewer
USING DEVICE MANAGER
M
`
Device manager program can be downloaded from <
Support
>-<
Online Tools
> menu at Hanwha Vision
website (https://www.HanwhaVision.com).
`
More instructions of Device Manager can be found at <
Help
> menu of the main page.
AUTOMATICALLY SEARCHING CAMERA
If a camera is connected to the same network of the PC where device manager is installed, you can find
network camera by using search function.
1.
Click <
Search
> at the main page of device manager.
2.
Check the camera from the list.
~
Check MAC address at the sticker attached to the camera.
CONFIGURING IP ADDRESS
If you want to change camera network setting, <
Login OK
> sign must be displayed at <
Status
>. Click
<
Authentication
> at the main page to log in.
Configuring Static IP
Manually insert and configure IP address & port information.
1.
Click the camera from the list that you want the change the
IP setting.
2.
Click <
IP Assign
> at the main page of device manager.
3.
Select <
Assign the following IP address
>.
~
IP information of the camera will be displayed as previously
set.
4.
Fill in IP & Port related categories.
If not using a Broadband Router
For setting <
IP Address
>, <
Subnet Mask
>, and <
Gateway
>, contact your network administrator.
~
HTTP Port : Used to access the camera using the Internet browser, defaulted to 80.
~
RTSP Port: A port that controls real-time streaming. The initial value is 554.