installation & connection
12_
installation & connection
3.
Connect the network cable to the PoE port of the camera.
4.
Adjust the lens to the desired direction with reference to “
Adjusting the monitoring direction for the
camera
” section. (page 14)
`
If you tilt the lens, you may need to adjust the lens as this may block the screen.
`
Connect a monitoring device to the USB port and then monitor and adjust it. (page 14)
Assembling the dome cover
[Directly installing on wall/ceiling]
1.
Assemble the dome cover.
J
`
Make sure to firmly tighten the fastening screws so that there is no water damage issue.
2x
TR10
J
`
Be careful not to alter the monitoring direction of your camera.
Summary of Contents for QNV-C9011R
Page 1: ...NETWORK CAMERA User Manual QNV C9011R QNV C8011R QNV C8012...
Page 25: ......
