Snmp
Using the SNMP protocol, the system or network administrator can monitor the network devices remotely as
well as the operating environment.
menu > network > Snmp
•
Enable SNMP v1 : SNMP v1 is used.
•
Enable SNMP v2c : SNMP v2c is used.
- Read Community : Enter the name of read-only community to access the SNMP information. By default it is
set to <
private
>.
- Write Community : Enter the name of write-only community to access the SNMP information. By default, it
is set to <
public
>.
•
Enable SNMP v3 : SNMP version 3 is used.
- Password : Set the initial user password for SNMP version 3.
•
Enable SNMP Traps : SNMP trap is used to send important events and conditions to the Admin System.
- Trap Manager : Enter the IP address to which messages will be sent.
J
`
SNMP v3 can be set only if the security connection method is set to HTTPS mode.
See the "
SSL
" page under "
Menu Setup
>
Network Configuration
" in the Table of Contents.
dHcp Server
You can set the internal DHCP server and assign an IP address to the network camera.
network Setting
menu > network > dHcp Server > network
•
Network : Select <
Setup
>, and you can set the IP range operated by the server and time.
to set the dHcp server
1.
On the DHCP Server Setup window, click <
Setup
>.
2.
Select <
run
> in the <
Status
> field.
3.
Enter the starting IP and end IP in the <
ip range
> field.
4.
Fill in the <
ip lease time
> field.
5.
Click <
ok
>.
The IP range entered is set as the DHCP server address of the network.
check ip
You can check the IP address assigned to the current DHCP server, MAC address, and the connected network
port information.
menu > network > dHcp Server > check ip
•
Network : If the product supports multiple network ports, you can select from the many network ports.
`
For QRN-410 and QRN-810 that support only one network port, you cannot select from different network ports.
English
_51
● menu
Setup