PT01-005719A
(Mounting the camera directly)
2
Install the camera onto the Hanging Mount.
`
Make sure you insert the Mount in the right direction.
(Mounting the camera with a Backbox)
2-1
Install the Backbox onto the Hanging Mount.
`
Make sure you insert the Mount in the right direction.
2-2
Assemble the camera to the Backbox.
Installation
1
Insert the Hanging Mount to 1-1/2” PF screw-thread (female) pipe or to the
Wall/Ceiling/Parapet Mount (SBP-300WM or 300WM1/300CM/300LM) and
turn it clockwise to secure to the Pipe or Mount.
J
`
Make sure you fix the Pipe or Mount so that it reaches to the end of
the 1-1/2” PF screw thread on the Hanging Mount. If not secured
tightly, the Hanging Mount may loosen from the Pipe or Mount,
causing physical damage or malfunction.
(Make sure you check the connection between two components
before proceeding with the next step.)
Screw holes for
installation in Backbox
A
type holes
Screw holes for
camera installation
