Doc No. IM4772-7
Page 12 of 14
iSense
5.2 Connecting a Probe
– JO91 Current Clamp Example
For this example a current clamp is used to demonstrate how to connect one of the accompanying devices to
the unit (Fig. 6). A J091 is illustrated. Other (
DC only
) clamps are connected in a similar manner.
Channel No.
+ve
-ve
1
Green (pin1)
Black (pin2)
2
Red (pin3)
White (pin4)
3
Yellow (pin5)
Blue (pin6)
Any unused pairs should be twisted together.
J091
OUTPUT
www.hanewll.com
J091
OUTPUT
www.hanewll.com
1. Lift the latch found on the side
of the unit and open the
released clamp.
2. Thread the single core cable
through the middle of the clamp
and then secure the latch.
Figure 6 Connecting a JO91
– 1
