AT8100 Alcohol Tester operation manual
3
4.2 Power off
4.2.1 Manual power off
In the power on mode, press
button at least 1s, the tester will be powered off.
Choose
E
E
E
x
xx
i
ii
t
tt with
M
M
M
e
ee
n
nn
u
uu interface, then press “
” button to confirm power off.
4.2.2 Power saving off
The tester will be powered off if without any operation for more than 3 minutes at main
interface.
4.2.3 Low battery power off
The tester will be powered off if the battery is too low, please take out the battery and
recharge or store them.
Indication of battery icon
Full battery capacity
Low battery capacity
Partial battery capacity
Short of battery capacity, recharge it timely
4.3 Test
As indicated in picture 1, put on a clean one-off mouthpiece. As picture 2, press
button
in the main interface, the screen will show Waiting, take a deep breath till the screen
indicates “Blow Now”, blow equaly to the mouthpiece in the uniform continuity way till when
hearing a ring.
The screen will display “Processing” when blowing finished, remind that the tester is
analyzing the breath gas sample. Do not blow at that moment, otherwise the result will be
influenced. After the analysis, the screen displays concentration value and the follow several
test types:
（
1
）
Normal: After testing finished, if the testing result is under the pass level,
concentration value will indicate “Clean”.
（
2
）
Pass: After testing finished, if the testing result reaches the pass level,
concentration value will indicate “Pass”, and buzzing at the same time.
（
3
）
Fail: After testing finished, if the testing result reaches the fail level, concentration
value will indicate “Fail”, and buzzing at the same time.
（
4
）
Passive
test: If tester didn’t fit test or have ability to test, being taken a passive test.
When the screen indicates “Blow Now”, take the mouthpiece off and the hole of
blowing
aim to the tester’s nostril. After 2s, press
button to enter into
passive test status. The screen indicates “Passive” and the result after analysis.
（
5
）
Test rejection: the tester wil
l buzz and indicate “Rejected
？
” without blowing after
indicating “Blow Now” for 30s, meanwhile, press
【
C
】
button to return to “Blow
Now” mode, press
button enter into display for result, and indicate
“Rejected”.
In the display of result mode, Press
button to save result and enter into printing
interface, press
【
C
】
button to cancel saving and return to the main interface.
4.4 Print
Press
button to enter into the printing interface in the display of result mode. The screen