Hanter® Wireless Intelligent Alarm Systems - Model HM2088
5.1.3 Voice Message Recording & Playing
a. Recording
Step 1: Press “
” key of the Keychain Remote Control
Step 2: Press “Record/Play” key on Control Panel
Step 3:Home Arm LED will light
Step 4:Press the “1” key on Control Panel
Step 5:Away Arm LED will light
Step 6: Record 10 second voice message into “Record’ port of the control Panel
(Bottom Right). Sample of message: “
Help! Help! Help! Alarm is triggered
at No 86, Northern Street, Uptown, please help
!”
Step 7: When finished recording, press “#” to exit
Note: The message can be re-recorded anytime by following the above steps. Any
Language can be used to suit your practicality, as long as the voice projection
are loud and clear.
b. Play back recording
Step 1:Press “
” key of the Keychain Remote Control
Step 2:Press “Record/Play” key on Control Panel
Step 3:Home Arm LED will light
Step 4:Press “0” key to play the recorded message
Step5: Press “0” key for re-play the record message
Step 6:Press “#” to exit
5.2
Operations
5.2.1 Away Arm
Under Away Arm status, Smoke and Gas Leak Detector will be on armed mode
instantly. Door Switch and Motion Sensor need approximately 30 seconds to enter
arming mode. This is to allow the user to have enough time to leave the monitored
or detected compound. The Away Arm LED will light after 30 seconds.
a.
Operate by Keychain Remote Control
Press
“
”
of the Keychain Remote Control, the control Panel will emit “Ding
Dong” sound to confirm the alarm system entering Away Arm status.
b. Operate by Keypad of Control Panel
Step 1: Press the “Program” key on Control Panel
Step 2: Input 4 digits “Password”
Step 3: Press “Away Arm” key
Step 4: The Control Panel will emit “Ding Dong” sound to confirm the alarm
system enters into Away Arm status
5.2.2 Home Arm
Under Home Arm status, the Control Panel
will not
receive any signals from Door
Switch and Motion Sensor units. However, it will receive signals from the Smoke
and Gas Leak Detector which are still in armed status.
P. 9
Hanter® Wireless Intelligent Alarm Systems - Model HM2088
Enter 3 times
5 “Beep”
Invalid password
Valid Password
Press “0”
Press “1”
Press “#”
Press “2”
Press “2”
Press”3”
Press *”
Press “4”
Press “5”
Press “6”
Press “7”
Press “8”
Press “9”
P. 12
Dial
Telephone
8 ringing
Enter Password
Line disconnected,
Exit
5 Beep
Stop Siren
Start Siren
Activate Silent Alarm
Deactivate Silent Alarm
Home Arm
Away Arm
Enter live feed listening
Quit live feed listening
Enable Control Panel receive signal
from Smoke and Gas Leak Detector
Disable Control Panel receive signal
from Smoke and Gas Leak Detector
Exit
Controlling
Home
Electrical