Remote control and data transmission
EN
HTM200 user manual
Copyright Qingdao Hantek Electronics Co., LTD
30
6
Remote control and data
transmission
There are basically three ways to remotely control the instrument as followings:
User defined programming
Users can program to control the instrument using Standard Commands for
Programmable Instruments (SCPI). For detailed instructions on commands and
programming, refer to the
Programming Manua
l of the series.
Use PC software or Android apps
Users can use the PC software or Android applications of this series to remotely control
the instrument.
Network data transmission
This product supports network data transmission. Users can realize communication
between the instrument and PC terminal or Android mobile terminal through 4G network
module.
The instrument supports communication with computer through USB interface,
Bluetooth module and 4G network module. Remote control is based on the Standard
Commands for Programmable Instruments (SCPI) command set.
This chapter will introduce how to use the corresponding software to control the
instrument remotely through various interfaces.
Note:
Before connecting the communication cable, shut down the device to avoid
damaging the communication interface of the device.
6.1
Control via USB
Press the power button to turn on the instrument.
Use the USB cable to connect the instrument to an Android phone or a Windows
computer to carry out USB communication.
