User Manual
23
Setting steps:
1. Select the output channel
Press the digital channel button on the front panel, or continuously press the left "
◁
" and
right "
▷
" arrows to select the output channel to be set.
2. Set voltage/current:
Press the arrow keys to select voltage or current, use the numeric keyboard or knob to set
the value, press "×" to delete, and press "Enter" to confirm and exit editing.
3. Turn on the output
Press the "On/Off" key to turn on the output.
2. Over protection
Set the overvoltage and overcurrent protection in Source Settings.
OV Protection: If the output voltage reaches the voltage protection value, the output status
of the channel becomes OV, and the output is disabled;
OC Protection: If the output current reaches the current protection value, the output status
of the channel becomes OC, and the output is disabled.
3. 2-Wire/4-Wire
Only HDP4324S, HDP4324SH, HDP4424S, and HDP4424SH support 4Wire mode.
Source settings > 2W/4W Set 2-Wire/4-Wire mode.