Oscilloscope Functions
USER’S MANUAL 41
Control Setting
Source
: Select the
Pass/Fail
channel
Output
: Select the
Pass/Fail
output condition.
Stop When Output
: If it was checked, the Pass/Fail will stop when output.
Mask Setting
V
ertical
: Set the vertical limit range
Horizontal
: Set the horizontal limit range
“Create”
button: Click this button to create Pass/Fail area according to the mask
“Save”
button: Click this button to save the setups to file
“Load”
button: Click this button to load the saved setups file
Information Display
Fail
: It shows the fail waveform number.
Pass
: It shows the pass waveform number.
Total
: It shows the total of
Pass/Fail
waveform number.
Operation
Click
“Start”
button to start the
Pass/Fail
test.
Click
“Stop”
button to stop the
Pass/Fail
test.
The Pass/Fail function display
NOTE
:
Pass/Fall
function is unavailable in
X-Y
mode.