Operation Basics
USER’S MANUAL 24
2.3 The Vertical System
Click
“Setup->Vertical”
The following figure shows the vertical Setup window. It shows the vertical parameters setting.
1.
Select channel
: User can select the channel by clicking the Combo box.
2.
ON/OFF
:
Turn on or off the selected channel.
3.
Volt/Div
: Set the selected channel voltage range.
4.
Coupling
: Set the selected channel to DC/AC/GND.
5.
Probe
: Set the Select one according to the probe attenuation factor to ensure correct vertical
scale reading
6.
Bw Limit
: Reject the frequency component higher than 20MHz.
7.
Invert
: Invert the selected wave.
Also user can also set parameters in the right sidebar.
