Hantek DMM-365A, User Manual

Page: 36 / 36

Appendix
USER’S MANUAL 34
Appendix C: General Maintenance
General Care
Do not store or leave the Data Logger where the device will be exposed to direct sunlight for long
periods of time.
Caution
To avoid damages to the device or probes, do not expose them to sprays, liquids or solvents.
To avoid damages to the surface of the device or probes not use any abrasive or chemical
cleaning agents.
Cleaning
Inspect the device and probes as often as operating conditions require. Make sure the device
disconnect form all power sources.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the Data Logger and probes with a lint-free cloth to
avoid scratching the clear glass display filter.
2. Use a soft cloth dampened with water to clean the device.