Hantek DMM-365A, User Manual

Page: 26 / 36

Operating Data Logger
USER’S MANUAL 24
Connect Data Logger probes (HT325) with DMM-365 as illustrated in the following figure:
Figure 2-13
Then, the following figure will be displayed on the screen:
Figure 2-14 Resistance Measurement
2.4 Making a Diode Measurement
To make a measurement on the diode, follow these steps:
1) Click
the “Diode” key and a diode symbol appears at the top of the screen.
2) Connect the black lead into the COM banana jack input and the red lead
into the V/Ω/C banana
jack input.
3) Connect the red and black leads to the diode and the voltage value of the diode is displayed on
the screen in volt.