Hantek 1008, User Manual, Page: 73 / 85

User can adjust the controls to meet your measurement to optimize the waveform
Simple Measurement
display.
To measure the frequency and “ Vpp ”, you can do these steps as follows:
1. Click the “ Measure->Horizontal->Frequency ” button, the frequency of the signal
display on the bottom of the waveform interface.
2. Click the “ Measure->Vertical->Peak-to-Peak ” button, the “ Vpp ” of the signal will also
display on the bottom of the waveform interface.
3. To clear the measurement on the waveform interface, click the “
Measure->Clear
Measure ” button.
72
Hantek1008