– 10 –
– 11 –
Elongate the exhaust pipe and snap
the flat end of the exhaust pipe
joints into the hole of the window
sealing plate assembly (as shown in
Fig.5 and Fig.6) .
Notes:
The flat end of the exhaust pipe
joints must be snapped into place.
The pipe cannot be distorted nor
has substantial turning (greater
than 45 °). Keep the ventilation of
the exhaust pipe not blocked.
Figure 5
Figure 6
Important notice:
The length of the exhaust hose shall
be 280~1,500mm, and this length is
based on the specifications of the air
conditioning. Do not use extension
tubes or replace it with other different
hoses, or this may cause a malfunction.
Exhaust host must be not blocked;
otherwise it may cause overheating.
6. Drainage Instructions
This machine has two drainage
methods: manual drainage and
continuous drainage.
1. Manual drainage:
When the machine stops after the
water is full, turn off the machine
power and unplug the power plug.
Notes:
Please move the machine
carefully, so as not to spill the water
in the water pan at the bottom of
thebody.
Place the water container below
the side water outlet behind the
body.
Unscrew the drainage cover and
unplug the water plug, the water
will automatically flow into the
water container.