TFT-LCD Monitor
5
Introduction
-
Connection to
Signal Source
<Power Source Connection>
<Signal Cable Connection>
① ② ③
① ②
①
Port for 12V DC cable from adapter or stand.
②
Port for signal cable from signal source.
③
Port for AC power cable
.
General
For Macintosh
Adapter for Macintosh(Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP
switch by the resolution.
1. Use 220V or 110 V.(Free Voltage)
2. Connect monitor and Signal Source via Signal cable.
3. Power on the monitor and computer.
4. Connection is finished.
Basic Option
Basic Option
