7
-
18
Hanskamp AgroTech BV (The Netherlands)
www.hanskamp.com
L
’
port
EN
Sluithek
-
Closing gate
-
Schließbügel
-
Porte arrière automatique
3.
Installation and Operating Instructions
General description
The L
’
port closing gate from Hanskamp is a pneumatically supplied gate that is de-
signed to close the out of parlour feeding station for cows. The L
’
port closing gate
must be attached parallel to the feed motors from all the feed sorts in de out of par-
lour feeder. This assembly instruction will guide you through the installation of the
L
’
port closing gate (fig. 1). Reed this instruction carefully and follow the safety instruc-
tions. Assembly examples and further information can be found on our website:
www.hanskamp.com.
The order numbers and names of some parts are listed in the appendix.
Transport and storage
The L
’
port closing gate will be shipped on a pallet. This pallet is completely sealed and
the corners are covered with tape to prevent damage. The L
’
port closing gate is also
stored this way.
Please note! Always use an appropriate vehicle (forklift truck, pallet fork,
pump truck, etc.) to move the pallet. Parts may fall off the pallet when it is
being unpacked.
The pallet includes:
1.
1x Art. no. 4111 Moving element;
2.
1x Art. no. 4112 Extension element
(universal) or Art. no. 4113 Extension
element (XL);
3.
2x Art. no. 4109 Standing leg tube;
4.
1x Art. no. 4108 Hinge tube;
5.
1x Art. no. 4110 Cylinder support tube;
6.
1x box with remainder parts.
1
Type designation, can be found on the control box
Function
description
control switch
Product
description
Item number
CE/UKCA
marking
Contactdetails