Installation Considerations
For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This trim kit requires rough valve 13444181 and
mounting plate 39449001 (not included).
The rough valve and mounting plate must be
installed, and the mounting surface complete and
made watertight before installation of this trim kit.
This unit is not anti-scald. If required by local
plumbing code, install this unit in combination
with an approved remote pressure balance valve
or other approved device.
Protection against backflow is provided by a dou-
ble check valve and by a self-resetting diverter.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
•
•
•
•
•
•
•
Technical Information
Recommended water pressure
15 - 75 psi
Max. water pressure
145 psi
Recommended hot water temp.
10° - 140° F*
Max. hot water temp
176°F*
Flow rate - handshower
max. .5 gpm
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
English
Tools Required / Outiles Utiles /
Herramientas Útiles
17 mm
25 mm
Summary of Contents for Urquiola 11443 1 Series
Page 4: ......
