Page EN-22
Installation and assembly
Choose a suitable location
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin.
– The measurements of the recess must at
least correspond to the details in the follow-
ing diagram.
90 °
90 °
600 mm
820mm
100
580mm
80
Inlet/outlet area
and electrical con-
nection.
820 mm
450 mm
90°
90°
580 mm
80 mm
100 mm
CAUTION!
Risk of injury!
Improper handling of the appliance may
result in injury.
■
The appliance is heavy and bulky. Seek
the help of another person during trans-
port, installation and assembly.
■
If a trolley is used to move the appliance,
the appliance must be moved as shown
on the packaging.
■
Only lift the appliance as shown on the
packaging.
Installation and assembly
■
Remove all obstacles on the transport
route and from the installation location,
e.g. open doors and clear away objects
lying on the fl oor.
Having the outlet hose
connected
Specific technical measures are required to
connect the outlet hose (25) to the trap (si-
phon) of your washbasin/sink. For this rea-
son, only plumbing experts or members of
our service department may connect (see
„Service department“ on page EN-30) the out-
let hose (25).
NOTICE
Potential malfunction!
Failing to connect the appliance correctly
may cause malfunctions during operation.
■
Make sure that the waste water can drain
freely at any time. To do this, the drain-
age cross-section must be at least 40
mm.
■
Make sure that there are no kinks in or
damage to the outlet hose.
■
Make sure that the end of the hose is not
submerged in the pumped water.
■
Do not extend the outlet hose or replace
with another drainage pipe.
Connect the outlet hose’s outlet as follows:
Ø 40 mm
max. 1000 mm
