Page EN-13
Dishwasher detergents, rinse aids and dishwasher salts
Adding dishwasher salt
NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface by using dish-
washer salt in an improper manner.
■
Only use regenerating salt which is
specifi cally intended for dishwashers.
■
Always wipe away split dishwasher
salt immediately with a damp cloth.
■
Immediately after adding the dish-
washer salt, launch a wash pro-
gramme.
You don’t need to add dishwasher salt
to the dishwasher salt compartment if
– you are exclusively using multitabs
which already contain dishwasher salt,
– the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– if the control display “Add dishwasher salt”
(13) lights up.
(23)
1. Remove the lower dish rack (18).
2. Turn the cover on the dishwasher salt dis-
penser (23) anticlockwise and remove it.
3. Upon first use: Add 1.5 l water to the dish-
washer salt dispenser so that the dish-
washer salt does not clump.
(c)
4. Place the supplied filling funnel (c) on the
compartment opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt dis-
penser (23) clockwise up to the stop.
8. Replace the lower dish rack (18).
9. Start a dishwashing programme imme-
diately or carry out a test run when first
used (see „Test run“ on page EN-29).
