Page EN-33
Troubleshooting table
Problem
Possible cause
Solution
The dishes are not com-
pletely clean.
There are food scraps which
are encrusted onto the dish-
es.
Soak dirty dishes prior to washing
the dishes.
The dishes have not been
stacked optimally.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er“ on page EN-13).
You have selected the incor-
rect dishwashing programme.
Select the correct dishwashing
programme (see „Dishwasher pro-
gramme table“ on page EN-17).
The dishwasher detergent is
incorrectly dosed.
Use the correct dosage of dish-
washer detergent (see „Dishwasher
programme table“ on page EN-17).
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not ro-
tate unhindered.
Ensure that no dishes are impeding
the motion of the spraying arm.
The nozzles on the spraying
arm are blocked/calcified.
Clean the nozzles (see „Cleaning
the spraying arm“ on page EN-23).
Error indicators
Code
Solution
E1
: It takes too long for the
water to fill up.
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see „Connect
the inlet hose“ on page EN-24).
Ensure that the water pressure is correct. See „Technical specifi-
cations“ on page EN-36.
E3
: The heating element is
defective.
Have the appliance checked and repaired.
E4
: Water overflow
Switch off the tap. Find the gap in the seal (or have someone find it)
and repair the leak (or have it repaired).
E8
:Internal fault
Have the appliance checked and repaired.
ED
:Internal fault
Have the appliance checked and repaired.
