Page EN-31
Installation, connection and initial commissioning
(e)
(g)
(f) (g)
11. Screw the dishwasher to the kitchen
unit.
a) If you have granite worktops, remove
the internal side cover caps (f) and screw
the dishwasher to the adjacent kitchen
cupboards.
Re-cover the screws (g) with the cover
caps.
b) For all other worktops, screw the
mounting bracket (e) firmly to the work
surface.
Mounting the front panel
If you do not have a front panel on the
appliance, please read on from
‘Adjusting the door’s accessibility’ on
page EN-33.
You can mount a front panel on the dishwash-
er door which matches your kitchen. The front
panel must not exceed a weight of 5 kg.
1. Hold the front panel against the dish-
washer door such that the lower side of
the front panel is flush with the adjoining
kitchen cupboards.
2. Measure the distance between the front
panel and the control panel.
(g)
3. A gap of 5 mm to 25 mm can be
offset with the 5 mouldings supplied (g).
Remove the required number of moulding
from the block. To do so, move the mould-
ing vigorously but without using tools.
4. If you only need one moulding, saw
off the four feet that stick out,
clamp the moulding under
the control panel and secure
it using both countersunk
screws (l).
Continue with Step 7.
5. If you need more than one moulding, turn
the lower moulding and push it onto the
other mouldings. This hides the feet and
makes the surfaces flat.
Summary of Contents for WQP12-7735T
Page 42: ...Produktdatenblatt gemäß VO EU Nr 1059 2010 Seite DE 42 ...
Page 84: ......
