Hanseatic WQP12-7735T, User Manual

Page: 69 / 84

Page EN-27 Installation, connection and initial commissioning
Choosing a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
result in injury.
■
Seek the help of another person during
transport, installation and assembly.
■
If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■
Only lift the appliance as shown on
the packaging.
■
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The dishwasher must be positioned be-
neath a full work surface which is joined
together with the cupboards adjacent to the
dishwasher.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin or the floor
drain.
– The measurements of the recess must at
least correspond to the details in the dia-
gram.
• Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
Installation, connection and initial commissioning
Inlet/outlet area and
electrical connec-
tion.
Recess dimensions
90°
90°
580 mm
600 mm
80 mm
100 mm
820 mm
Having the outlet hose
connected
NOTICE
Risk due to malfunction!
Failing to connect the appliance cor-
rectly may cause malfunctions during
operation.
■
Make sure that the waste water can
drain freely at any time. To that end,
the outlet pipe must have a minimum
diameter of 40 mm.
■
Ensure that there are no kinks or dam-
age to the outlet hose.
■
Make sure that the end of the hose is
not submerged in the pumped water.
■
Do not extend the outlet hose or re-
place with another drainage pipe.
■
The outlet hose must only be con-
nected by qualifi ed personnel.