Page GB-10
Safety
The seals of the door are sensitive to oil
and grease.
■
Do not apply grease to the door seals.
■
Wipe away grease and oil which has
dripped onto the edge of the open
dishwasher door.
The door seals can be damaged by un-
suitable cleaning agents.
■
Do not use harsh, aggressive, sol-
vent-based or abrasive cleaners.
The device is designed for a water pres-
sure of 0.4 to 10 bar (0.04 to 1.00 MPa,
40 to 100 N/cm2).
■
If the water pressure is higher than
this, install a pressure reducer. If in
doubt, enquire about the water pres-
sure with the water supply company.
■
Never connect the appliance to the
water tap or the mixing arm of a wa-
ter heater (continuous fl ow heater,
pressure-free boiler etc.).
■
Ensure that the inlet hose is not
kinked and is carefully connected.
■
Do not cut through the inlet hose.
It contains electrical components. If
the inlet hose is damaged, have it re-
paired by a specialist.
■
Do not use old or previously installed
inlet or outlet hoses.
■
The outlet hose must be of a mini-
mum diameter of 40 mm so that the
water can be pumped away unhin-
dered.
■
Do not attach the outlet hose your-
self, have it installed by a special-
ist plumber. Have the outlet hose
checked regularly for damage or
kinks.