Materials required for assembly
Page EN-14
4. Place the 2-part flue screen onto the ex-
haust hood.
Installing the exhaust air
hose (only for exhaust air
operation)
(3)
(4)
1. Plug the end of the exhaust air hose (3)
with the “ø150 mm” opening onto the
connection in/on the wall (for opening size
see marking on the exhaust air hose).
2. Place the other end of the exhaust air
hose (3) on top of the check valve (4)
Final steps
1. Guide the mains cord covered in the flue
screen to the socket and insert it into a
properly installed socket.
[
(8)
(5)
(2)
2. Pull the upper part of the flue screen (2)
up to the wall mount (5) and tighten it
from the side with two sheet-metal screws
(8).
3. Remove the blue protective films.
Installation is now complete.
196634_EN_20190108.indd EN-14
196634_EN_20190108.indd EN-14
08.01.2019 12:39:17
08.01.2019 12:39:17
