Care and maintenance
Page GB-19
4. Once the grease filter is completely dry,
insert it into the opening to the left.
5. Push the locking mechanism to the left,
press in the grease filter upwards, and re-
lease the locking mechanism. The locking
mechanism (13) will snap into place.
6. Connect the appliance with the power
supply again.
Replace activated charcoal
filter (only applies to
circulation air operation)
Activated charcoal filters are required for
circulation air operation. They help combat
odours. They have to be replaced as soon
as the cooking odours can no longer be ade-
quately filtered.
If used frequently, you should change the fil-
ters regularly. Check them at least every 6
months.
For the source of supply, please see chapter
(see “Our Service Centre” on page GB-22).
1. Unplug the mains plug or switch off the
corresponding circuit.
(14)
(13)
2. Push the locking mechanism (13) of the
grease filter (14) to the left and careful-
ly remove the grease filter by pulling it
downwards.
3. Rotate the locking mechanism to the right
and remove the old charcoal filter (15).
It can be disposed of with the household
waste.
(15)
4. Insert a new charcoal filter (15) along the
left edge with the opening until it meets
the cord that protrudes from inside the
appliance and turn the locking mecha-
nism to the right in front of the charcoal
filter (15).
5. Insert the grease filter (14) and the fleece
charcoal filter into the opening to the left.
6. Push the locking mechanism to the left,
press in the grease filter (14) upwards,
and release the locking mechanism. The
locking mechanism (13) will snap into
place.
7. Connect the appliance with the power
supply again.