Assembly
Page GB-12
stove (for gas stoves, at least 65 cm) is
correct and the middle of the exhaust
hood is flush to the vertical guideline.
Check the alignment using a level.
(8)
guideline
3. Place the centre of the wall mount (8) on
this point and mark the three drill holes.
4. Drill holes into the marked spots with a di-
ameter that corresponds to the wall plugs.
(8)
5. Insert 3 screw wall plugs into the drilled
holes.
6. Attach the wall mount (8) to the wall with
3 screws.
(5)
(5)
Pins
7. Place the two halves of the check valve
(5) into the opening on the top of the
Exhaust hood.
Make sure that the pins on the valve are
facing outwards.
8. Carefully hang the exhaust hood on the
wall mount(8).
(13)
(14)