Operation
Page EN-19
Operation
Requirements
– You have read the chapter entitled „Safety“
on page EN-3.
– The exhaust hood is assembled as descri-
bed in chapter „Assembly“ on page EN-11.
Activated charcoal filter
• When using the appliance for air circula-
tion, only do so with activated charcoal
filters inserted.
• If neighbours complain about odours, it
may be a good idea to insert activated ch-
arcoal filters for exhaust air operation, too.
• For the source of supply, please see chap-
ter „Service“ on page EN-24.
• To insert (see „Installing/replacing the acti-
vated charcoal filter (only for circulation air
operation)“ on page EN-21).
Control elements
(28)
(27)
(29)
(30)
(31)
(27)
On/Off switch for blower, level 1
(28)
On/Off switch for blower, level 2
(29)
On/Off switch for blower, level 3
(30)
On/Off switch for the lighting
(31)
On/Off switch for the appliance
Switching device on/off
To switch the appliance
– on, press the button (31) once.
The button lights up and the fan works at
the lowest level.
– off, press the button (31) again.
The button light goes off and the device
switches to standby mode.
Fan
The blower of your exhaust hood has three
fan speeds.
– Select a speed:
Press the (27) (slow), (28) (medium)
or button (29) (fast) .
The selected button lights up and the fan
works at the required level.
– Switching off the fan:
Press the current fan speed button again
( (27), (28) oder (29)).
Operating Lighting
The exhaust hood is fitted with three LED
lamps and a LED light tube that illuminates the
glass panel (5). The lighting can be switched
on or off independently of the fans. The LED
light tube can be switched on/off independent-
ly of the LED lamps.
Switching the LED lamps on/off
To turn on/off
– the LED lamps,
briefly
press the
but-
ton (30).
– the LED light tube, press the the
but-
ton (30) for
longer
.
