Assembly
Page EN-17
cket (1) with two screws (7) to the motor
housing on the exhaust hood (9).
(7)
(10)
(11)
(12)
(2)
)
)
23. Screw the base plate (2) with two
screws (10), two washers (11) and two
nuts (12) to the mounting rails (7).
[
(8)
(12) (11)
(10)
)
))
(8)
(7)
24. Lay the stabilisation plate (8) on the
mounting rails (7) and screw (7) with two
screws (10), two washers (11) and two
nuts (12).
(4)
(1)
25. Insert the chimney panel (4) with the
ventilation slits upwards into the exhaust
hood (1).
(1)
(2)
26. With two people, lift the exhaust hood (1)
onto the housing and screw the base pla-
te (2) to the ceiling with 9 screws.
For concrete ceilings, use 6 heavy-duty
anchors.
(6)
)
))
27.
For exhaust air operation:
Attach the
exhaust air hose (6) with 150 mm diame-
ter opening (see marking on the hose) to
the vent opening in the ceiling.
