Assembly
Page GB-17
6.
For exhaust air operation only:
– Attach the exhaust air hose
2
with the
153 mm diameter opening (see marking
on the exhaust air hose) to the exhaust
opening
6
of the check valve
3
.
– Connect the exhaust air hose with the
150 mm opening to the connection in/on
the wall/ceiling.
7. Establish a connection with the power
supply.
Remove protective film
1. To switch on the exhaust hood, press
button
13
for 3 seconds.
The exhaust hood's cover will open.
8
2. Slide the grease filter lock
8
sideways
and carefully remove both grease filters
by pulling upwards.
3. Remove all protective films from both
grease filters.
4. Reinsert the grease filters in reverse or-
der.
5. Press the button
13
for
3 seconds
to close the exhaust hood’s cover and
switch the appliance off.
You have successfully assembled your
exhaust hood; the appliance is ready to
use.
