Care and maintenance
Page GB-19
(16)
(15)
4. Turning them clockwise, unscrew both
activated charcoal filters (15) to the right
and left of the motor (16) and remove
them. You can dispose of them with
household waste.
(16)
(15)
5. Fit the new activated carbon filters (15)
to the right and left of the motor (16) as
shown in section „Inserting activated
charcoal filters for air recirculation“, and
tighten them by turning them anticlock-
wise. Allow the locks to click into place.
6. Reinsert the grease filter (10). To do this,
place the grease filter (10) in the top
of the recess: Slide the lock upwards,
press down on the grease filter and re-
lease the lock. The grease filter engag-
es.
7. Close the cover (8) of the exhaust
hood (1).
8. Reconnect the power supply.
CAUTION
Risk of injury!
■
If one of the LEDs ceases to work, it
must be changed by an authorised
service technician.
Note for the service technician: This
exhaust hood requires LEDs with the
ILCOS D-Code DBR-2/65-H-64
220-240 V~, 2 W.
