Operation
Page GB-11
Safety lock (child safety lock)
The device is equipped with a safety lock.
When this is activated, no settings can be
changed.
• To activate the safety lock press the but-
tons(9) and (10) at the
same time
.
A beep will sound. The safety lock is now
activated.
• To deactivate the safety lock again press
the buttons(9) and (10) at the
same
time
.
A beep will sound. The safety lock is now
deactivated.
Setting the temperature
WARNING
Health hazard!
The appliance may not operate proper-
ly if exposed to low ambient tempera-
tures for extended periods of time. This
can then lead to an increase in temper-
ature inside the appliance.
■
Always abide by the prescribed am-
bient temperature (see product data
sheet at the end of this user manual).
Select an internal temperature to suit the
wine. Further information on the optimum
storage temperature can be found in the sec-
tion „Maintaining quality“ on page GB-14.
You can choose settings ranging from +5 °C
to +22 °C (41 °F to 72 °F).
The lower zone temperature can only be set
equal to or higher than the upper zone tem-
perature.
1. Select the desired interior zone by press-
ing key (11)
– once for the upper zone. The left-hand
temperature indicator (12) will flash.
– twice for the lower zone.
The right-hand temperature indicator
8.8.
8.8.
(12) will flash.
As long as the temperature indicator is
flashing, you can set the temperature.
2. The temperature of the selected zone can
be
– increased by pressing the key (13)
until the desired temperature is dis-
played.
– reduced by pressing the key (14) until
the desired temperature is displayed.
After a short while the flashing will stop and
the desired temperature will be set.
The appliance will adjust itself to the set
temperature while showing the current in-
ternal temperature.
Changing the temperature
unit
You can choose whether the internal temper-
ature is displayed in Celsius or in Fahrenheit.
The small green symbol on the top right next
to the temperature indicator
8.8.
8.8.
(12) lets
you identify the current setting.
• To change the unit, press the
C
F
key (15).
LED light
• To switch the LED on or off, press the
key (10).
