Start-up
Page EN-22
Integrating the appliance into
a kitchen unit
NOTICE
Risk of damage!
If the ventilation slits are covered, the
heat from inside the appliance cannot
be properly expelled.
■
Make sure that the ventilation slots
are not covered.
Space required for installing the appliance
under a worktop
J:
385 mm
K:
575 mm
L:
870 mm
M:
380 mm
N:
865 mm
O:
520 mm
P:
570 mm
1. First connect it to the power.
2. Slide the appliance into the recess. Make
sure that the mains cord does not be-
come trapped.
Basic cleaning
To remove the odour that comes with all
new appliances, clean the appliance before
using it (see “Care and maintenance” on
page EN-16).
Connecting the appliance
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
■
Do not operate or continue to oper-
ate the appliance if it
–
shows visible signs of damage, e.g.
the power cord is defective,
–
starts smoking or there is a smell of
burning,
–
makes unfamiliar noises.
In such cases, remove the mains plug
from the socket and contact our Ser-
vice department (see page EN-27).
■
Do not connect to a timer or a sepa-
rate remote-controlled system for dis-
tance monitoring and control.
■
Do not kink or pinch the mains cord
or lay it over sharp edges. This can re-
sult in a break in the cable.
CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
■
Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a mul-
ti-socket extension cable or a mul-
ti-socket plug.
