Start-up Page EN-17
4. Use the buttons and on
the control pad (20) to set the
hour.
Pay close attention to the
AM/PM display: AM = 12:00
midnight to 11:59 a.m.; PM =
12:00 noon to 11:59 p.m.
5. Press the button or the but-
ton on the control pad (20).
The hour display stops flashing
and the minute digit starts to
flash.
6. Use the buttons and on
the control pad (20) to set the
minute.
7. Press the Start/Stop button
(27) on the control pad (20) of
the remote control.
The digits no longer flash. The
time is set.
You have to manually
switch to daylight savings
time (DST) at the end of
March and to Central Europe
Time (CET) at the end of
October.
Pairing the remote
control to the appliance
You must pair the remote control
with the appliance in order to
control the appliance with the re-
mote control.
1. Switch on the appliance using
the On/Off switch (7).
2. Press the Start/Stop button
(27) for approx. 5 seconds
on the control pad (20) of the
remote control until the display
Time
blinks.
3. Press and hold the Start/
Stop button
(27) on the
remote control and switch on
the appliance using the On/Off
switch (7).
Three beeps sound, indicat-
ing that the remote control is
paired with the appliance.
The filter comes factory installed.
Your vacuum cleaner is now
ready to use.
Summary of Contents for HVRB25SS
Page 72: ......