HKS17060EW, HKS17060ES
Setting up the refrigerator
EN-11
Setting up the refrigerator
Changing the door hinges
You can change the side which the door opens on. The stop is on
the right on delivery. As this alteration requires some manual skills,
please read through the steps of the procedure beforehand. To
change the door hinges, you will need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket wrench
1. Open the refrigerator door.
2. Hold on tightly to the open door and loosen the two screws
14
of the hinge plate.
3. Remove the hinge plate and lift the door out of the lower hinge
pin.
4. Unscrew the screw
15
from the hinge plate and relocate/repo-
sition the hinge pin as shown in the illustration on the right.
14
15
6. Remove the cover cap
16
in the left upper corner of the refrig-
erator.
7. Hold on tightly to the front cover and loosen both screws which
were covered by the cover cap.
Remove the mounting
17
and the screws.
8. Screw the mounting back onto
17
the opposite side.
9. Put the cover cap
16
back on the mounting.
17
10. Remove the blind plug from the upper part of the door and
put it on the opposite side.
5. Attach the hinge pin and hinge plate cover again using the
screw
15
.
16
