HKS 8555A1
Setting up the refrigerator
13
Preparation
10. Unscrew both front levelling feet.
11. Unscrew the lower hinge plate. To do this, use an 8mm span-
ner or a cross-headed screwdriver.
12. Move the hinge pin to the opposite side of the hinge plate.
Use a 10 mm spanner to loosen or tighten the nut.
1.
2.
13. Screw the hinge plate tightly back onto the opposite side.
Make sure that the hinge pin is in the hinge bushing of the
door.
The door will now function properly again.
14. Firmly screw both levelling feet back onto the refrigerator.
15. Carefully stand the refrigerator upright.
16. Reinsert the blind plug on the opposite side of the door
You have successfully changed the door hinges.
6. Screw the hinge plate as well as the two screws back onto
the respective opposite side.
7. Place the cover back on the refrigerator. Push down on both
sides (left and right) of the front of the cover until you hear it
click into place.
8. Screw the two screws tightly back onto the cover. To do this,
use a cross-headed screwdriver. Replace both screw covers.
9. Tilt the refrigerator backwards (maximum 45°) to allow you to
adjust the lower door hinge also.
Summary of Contents for HKS 8555A1
Page 52: ......
