Attaching door handles
(a)
1. Unscrew the blind plugs (a) from both
doors.
(c)
(d)
(b)
2. Attach the door handles (b) to both doors
using the enclosed screws (c).
3. Cover the screw heads with the enclosed
blind plugs (d).
Setting up and aligning the
appliance
NOTICE
Risk of damage!
Insuffi cient air circulation may lead to
overheating and cause damage to the
appliance.
■
The entire space above the appliance
must remain clear.
■
The appliance should not be placed
directly against a wall (leave a mini-
mum clearance of 5 cm).
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
3. Level out any unevenness on the ground
using both of the front screw feet.
– Close the doors.
– Tilt the appliance backwards slightly and
screw/unscrew the screw feet (6).
– Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the
doors.
Start-up
Page EN-23
Summary of Contents for HKGK18860A3NFMSS
Page 73: ......
