Start-up
Page EN-22
Commissioning the appliance
CAUTION
Fire hazard!
Improper handling of the appliance
can lead to fi re and property damage.
■
Only connect the appliance to a
properly installed and earthed elec-
tric socket. Do not connect to a mul-
ti-socket extension cable or a mul-
ti-socket plug.
NOTICE
Risk of damage!
If the cooling unit has been transport-
ed horizontally, lubricant from the com-
pressor may get into the cooling circuit.
■
Allow the appliance to stand upright
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
WARNING
Risk of electric shock!
The appliance has no On/Off switch. In
the case of failure, it can only be com-
pletely disconnected from the mains
supply by pulling out the mains plug.
■
The appliance must therefore be con-
nected to an easily accessible socket
so that it can be quickly disconnected
from the power supply in the event of
breakdown.
WARNING
Risk of electric shock!
■
When installing the appliance, en-
sure that the mains cable does not
become pinched or damaged.
• Insert the mains plug into an easily acces-
sible and properly installed socket (220-
240 V~ / 50 Hz).
The appliance is then ready for use.
The fridge compartment light switches on
and off automatically when the fridge com-
partment door is opened and closed.
You will find all important information
about operation from page EN-12.
