Start-up
Page EN-23
Setting up and aligning the
appliance
1. Place the appliance on as flat and as firm
a base as possible.
2. Check the position with a spirit level.
3. Level out any unevenness on the ground
using both of the front screw feet.
4. Close the doors to do this.
Space requirement (when the door is open and when the door is closed)
637
1135
840
e
5. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
6. Stand the appliance back up again and
check the alignment with a spirit level.
Repeat the process until the appliance
is standing up vertically. The appliance
should not move when opening the doors.
Cleaning before use
In order to remove the odour which is pres-
ent in all new appliances, wipe the fridge and
freezer out prior to first use with a solution
made from 100 ml vinegar and 200 ml water.
Then wipe it out with clean water and dry all
of the parts off afterwards.
