Page EN-38
Troubleshooting table
The dishwashing results are not satisfactory
Problem
Possible cause
Solution
There are residues
or streaks on the
dishes.
The rinse aid is incorrectly dosed.
Adjust the dispensed dose (see “Chang-
ing the rinse aid dose” on page EN-15).
There is no dishwasher salt.
Add dishwasher salt (see “Adding dish-
washer salt” on page EN-16).
The dishwasher salt is clumpy.
Stir the dishwasher salt using the end of
a spoon or similar.
The dishes are not
completely clean.
There are food scraps which are
encrusted onto the dishes.
Soak dirty dishes prior to washing the
dishes.
The dishes have not been stacked
optimally.
Stack the dishes in such a way that
all parts can be reached by the water
jets (see “Loading the dishwasher” on
page EN-17).
You have selected the incorrect
dishwashing programme.
Select the correct dishwashing
programme (see “Programme table” on
page EN-21).
The dishwasher detergent is incorrectly
dosed.
Use the correct dosage of dishwasher
detergent (see “Programme table” on
page EN-21).
The water pressure is too low.
Turn the water tap on completely.
The spraying arm can not rotate
unhindered.
Ensure that no dishes are impeding the
motion of the spraying arm.
The nozzles on the spraying arm are
blocked/calcified.
Clean the nozzles (see “Checking
and cleaning the spraying arms” on
page EN-27).
