HGS 14355A2, HGS 14355A2S
6. Wipe the interior with warm rinsing water.
7. Clean the door seal. (See chapter „Cleaning the door seal“,
page 20.)
8. After cleaning thoroughly rub everything dry, including the
door seal, and briefly allow to air.
9. Insert the mains plug back into the socket and turn the tem-
perature controller
1
to ‘MAX’.
10. Place your frozen food back into the freezer.
11. As soon as a temperature of -18°C has been reached, you
can turn the temperature controller
1
back to the desired
position.
Cleaning the door seal
NOTICE
Risk of damage!
The freezer door seal is sensitive to grease and oil;
these make the door seal porous and brittle.
• Use damp, clean cloths only.
• Do not use corrosive, abrasive, soda or acidic deter-
gents or sponges.
Check the door seal regularly for contamination and damage to
ensure that no warm air can get into the freezer.
1. Clean the door seal with a damp cloth.
2. Clamp a piece of paper between the freezer and freezer
door at various locations. The paper should be difficult to pull
through at all points.
3. If the seal is not positioned evenly all round, use a hairdryer
to carefully warm the seal at the corresponding points. Care-
fully pull the seal out a little with your fingers.
Care and maintenance
20
Operation
