Page EN-26
Dishwasher operation
Unloading the dishwasher
CAUTION!
Risk of scalding!
Once the programme run has come to
an end the door opens automatically
for the hot steam to escape. Therefore
be careful.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Make sure that children do not open
the door if the programme run only
fi nished a short time ago.
■
Allow the dishes to cool before un-
loading the dishwasher.
Tripping hazard!
An open dishwasher door can quickly
become a tripping hazard.
■
Close the door after every use.
■
Only leave the door slightly open to
cool down.
NOTICE
Risk of damage!
■
Make sure that children and pets do
not stand on the open door.
Once the programme run has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher,
start with the lower rack and then unload
the upper rack. This will prevent water
dripping onto the lower layer of dishes
from the top layer of dishes.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
If no further settings are made, the appliance
will automatically switch off/enter standby
mode after 15 minutes.
Changing the programme
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can interrupt an active programme at any
point and start a new programme. But do not
forget to add extra dishwasher detergent if
the programme has already been running
for a longer period and the cover of the dish-
washer detergent dispenser is already open.
1. Press the button (10) to interrupt the
programme.
The two dots in the remaining time
display (14) are permanently illuminated.
2. If required, add extra dishwasher
detergent.
3. Simultaneously press the
P
(2) and
(3) buttons until only ‘
-.--
’ appears on
the display.
4. Select the new programme and any
additional options as described on the
previous pages.
5. Press the button (10).
The newly selected programme starts.
