11. Unscrew the slides (28) again and push
them onto the fitted runners (30).
12. Screw the slides (28) back onto the ap-
pliance door.
13. Press the covers (29) onto the slides.
14. Check that the doors can open and
close easily and that the they seal prop-
erly when closed.
If necessary, adjust the position of the re-
frigerator and of the slides and runners.
(39)
(38)
15. Loosen the screws (38) and slide the
two side angle brackets (39) such that
they touch the built-in cabinet.
(39)
(34)
16. Use two long screws (34) to secure each
of the side angle brackets (39).
(35)
(35)
(34)
(36)
(36)
17. Once the doors can open and close
correctly, screw the refrigerator to the
built-in cabinet. To do so, use four short
screws (35) at the top and the two long
screws (34) at the bottom.
After the long screws (34) are driven,
cover them with thd screw covers (36).
(33)
18. Reattach the covers (33) in the cover
panel (27).
(32)
(39)
19. Put the covers (32) over the side angle
brackets (39).
Installation in a kitchen unit
Page GB-29
