Start-up
Page EN-29
(18)
(19)
11. Press the covers (19) onto the slides (18).
12. Check that the doors open and close
easily and that the appliance door seals
properly when closed.
If necessary, adjust the position of the
refrigerating appliance and of the slides
and runners.
(23)
(22)
13. Once the doors open and close correct-
ly, screw the refrigerating appliance to
the built-in cabinet. To do so, use 3 short
screws (23) at the top and the two long
screws (22) at the bottom.
(24)
14. With the door open, press the sealing
strip into the gap between the refrigera-
tor and the built-in cabinet.
Installation is now complete.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it (see „Cleaning the fridge“ and “Defrosting
and cleaning the freezer” on page EN-21).
You will find all important information
about operation from page EN-12.
