Start-up
Page GB-24
(12)
(13)
11. Press the covers (13) onto the slides.
12. Check that the doors open and close
easily and that the appliance door seals
properly when closed.
If necessary, adjust the position of the
refrigerator and of the slides and run-
ners.
(17)
(19)
13. Once the doors open and close correct-
ly, screw the refrigerator to the built-in
cabinet. Use three short screws at the
top and two long screws at the bottom.
(18)
14. With the appliance doors open, press
the sealing strip (18) into the gap be-
tween the refrigerator and the built-in
cabinet.
15. Finally, screw the two mounting brack-
ets between the upper and lower door
with the built-in cupboard. Use two short
screws each for this.
(16)
16. Insert the cover (16) for the mounting
bracket on the mounting bracket on the
opposite side of the door.
Installation is now complete.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it (see „Cleaning the fridge compartment“ on
page GB-16) and (see „Defrosting and clean-
ing the freezer compartment“ on page GB-17).
You will find all important information
about operation from page GB-10.
Summary of Contents for HEKS 14454GA2
Page 60: ...Technical specifications ...
